SPT SD-65E Dehumidifier User Manual


 
3
NAME OF PARTS
CONTROL PANEL
1. POWER Button: Press once to turn unit ON, unit will begin operating in dehumidifying mode
at original factory setting (60%RH). Press again to turn unit OFF.
2. CONTINUOUS Button: When unit is in operation, press this button to set CONTINUOUS
DEHUMIDIFYING mode.
3. TURBO Button: Press this button to set unit in high fan speed.
4. NORMAL Button: Press this button to set unit in low fan speed.
5. POWER Indicator: Will flash slowly when power is connected at the socket (initial power).
Indicator lights up when unit is turned ON and dark if unit is OFF.
6. CONTINUOUS Indicator: Lights up when CONTINUOUS DEHUMIDIFYING mode is
selected.
7. FULL Indicator: Lights up when bucket is full, unit will stop operating.
8. HUMITIDY + Button: Press this button to increase the humidity setting. Range of
adjustment is from 35% ~ 80% RH (in 5% increments).
9. HUMIDITY - Button: Press this button to decrease the humidity setting. Range of
adjustment is from 80% ~ 35% RH (in 5% increments).
10. TURBO Indicator: Lights up when TURBO button is pressed, unit will run in high fan speed.
11. NORMAL Indicator: Lights up when NORMAL button is pressed, unit will run in low fan
speed.