Filter
Top Products
2-45
(Stream2)
down list. Frame rates available for stream 2 may be less than
stream 1, depending upon the setting.
Quality
When encoder type is MJPEG:
Select the quality value of MJPEG encoder type from 1 to 100.
Click the
[Apply] button to confirm the settings or click the Reset] button to
re-enter the parameters.
Exposure / White balance
Line Frequency
Change settings between 60Hz or 50Hz,
depending on the AC power type of your region..
WDR Mode
This determines if the WDR processing is turned
on or off. Turn this on only when you have very
large brightness differences in a single scene.
Otherwise leave it off.
WDR Level
The strength of image modification by WDR
algorithm. Increasing this will increase the effect
of WDR processor.