Filter
Top Products
− 3 −
Additional Information for Using Sony Wall-Mount Bracket (SU-WL700)
4 Detach the Table-Top Stand from the TV, if necessary.
Remove the bottom cover and terminal cover rst before detaching the Table-Top Stand.
Bottom cover
Terminal cover
Remove the screws guided by the arrow marks of the TV.
✍
• Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on
the TV.
• When removing the Table-Top Stand from the TV, lay the TV face down on a stable work surface that is
larger than the TV.
• To prevent damaging the surface of the TV, make sure to place a so cloth on the work surface.
• When liing or moving the TV, keep a so cloth underneath to prevent damage.
• e number and position of the screws on the rear of the TV diers, depending on the model of TV; be
sure to read the operating instructions of your TV.
CAUTION
• If pressure or shock is applied to the surface of the TV, the TV may break or become damaged.
• Lay the TV face down on a stable and level surface with the Table-Top Stand hanging over the edge of
the surface. Having the TV face and the base of the Table-Top Stand on the same level surface will create
an unstable working condition and can damage the TV.
• When detaching the Table-Top Stand from the TV, hold the Table-Top Stand securely with both hands.
5 Connect the supplied AC power cord.
✍
• Do not attach the bottom cover and terminal cover.