Filter
Top Products
8 (US)
Attach the glass shelf
1 Attach the glass shelf.
1 Insert the glass shelf into the grooves in both
pillars of the Floating Stand.
2 Secure the glass shelf from beneath with the
supplied securing screws (for glass shelf) as
shown below.
Note
• Insert the glass shelf after installing the TV on the
Floating Stand. If you fail to do so, you may hit the
glass with the TV during installation and product
damage or personal injury may result.
• Attach the glass shelf to the Floating Stand holding
the glass shelf with the "caution" label at front
right, as shown in the illustration.
1
2
3 Secure the TV and the Floating
Stand with four securing screws
and with two clamp screws
supplied with the Table Top
stand, which you detached in
procedure 1.
Note
When using an electric screwdriver, set the torque
setting to about 1.5 N·m.
Rear side of the TV
Securing screw
Clamp
screw
Insert the glass
shelf all the
way in until it
touches the
stopper.
Front of the
TV
Insert the securing screw so that
the cross slot side faces down as
shown above in the illustration.
Caution label