Filter
Top Products
3 (US)
English
US
Be sure to install the Tabletop Stand on a stable surface.
If you install the Tabletop Stand on an unstable surface, it may lose its balance and
topple over or fall off. This may cause injury or property damage.
Be sure to take measures to prevent the stand from toppling over.
If you fail to do so, the Tabletop Stand may topple over during an earthquake and cause injury or property
damage. Draw a wire or the like through the holes of the Security Attachments located on the upper part of the
Main Bracket and fix the other ends of the wires to the wall to anchor the Tabletop Stand and prevent it from
toppling over.
Do not lean on or hang from the Tabletop Stand.
The Tabletop Stand may topple over and cause injury.
Do not block the ventilating holes on the Display Unit.
If you block the ventilating holes on the Display Unit by covering the top of the
Tabletop Stand with a cloth or the like, the Display Unit may become overheated
and this may cause a fire.
Be sure to carry the stand in the manner shown in this manual.
If the Tabletop Stand is carried incorrectly, it may topple over and cause injury.
Do not stumble over the Power Cord or the Display Interface Cable.
If you stumble over the Power Cord or the Display Interface Cable, the Tabletop Stand may topple over and cause
injury.
Do not carry the Tabletop Stand with Display Unit installed on it.
Be sure to remove the Display Unit before attempting to carry the Tabletop Stand.
If you fail to do so, the Display Unit may fall and cause bodily injury.
CAUTION
If the following precautions are not observed, there is a possibility that the user will suffer injury or that
property damage will occur.
Do not install equipment other than the specified product.
This Tabletop Stand is designed for use with the specified product. If you install equipment other than the specified
product, it may fall and cause injury or property damage.