Sony SPM-TRI/C Indoor Furnishings User Manual


  Open as PDF
of 6
 
- 6 -
(Optional) fixed installation
Step 1
Invert the stand and locate the two (2) mounting points on the bottom of the stand for (optional) fixed tabletop installation. Measure the
distance between center to center of these two (2) holes and mark the table. See figure 4.
NOTE: This diagram shows
the bottom of the stand.
Step 2
OPTIONAL TABLE MOUNTING
If securing to a wood table, mark the table and drill properly. Secure the stand with the two (2) #10 x 1-1/4" wood screws (supplied).
NOTE: Longer or shorter wood screws and or mounting hardware depending on your installation environment are (commercially
available). See figure 5.
NOTE: Check all hardware for proper
tightness and security.
Wood screw
access holes
Wood screw
access
#10 x 1-1/4”
wood screws
Flat wood surface
 previous