Filter
Top Products
Using the TIMER Q menu
DAYLIGHT SAVING: NO1
CURRENT TIME SET
ON/OFF TIMER
CHANNEL BLOCK
_MENU
--- --:-- AM
Move_ SeleCt_ Exlt_
For detailed information on using the remote
control to modify menu settings, refer to
"Learning menu selection" on page 19.
To select the TIMER _ menu:
Highlight (_ _ Select
Display
.... ®
CD
5
To cancel the ONIOFF TIMER
function
Press RESET while the ON/OFF TIMER
menu is displayed.
Tip "_"
Set DAYLIGHT SAVING time before setting the clock.
DAYLIGHT Spring: Select YES to compensate for Daylight Saving Time.
SAVING The current time moves one hour ahead.
Automatically adjusts Fall: Select NO at the end of Daylight Saving Time.
the hme The current time moves back one hour.
CURRENT
TIME SET
Necessary for the ON/
OFF TIMER
ON/OFF TIMER
Wakeup orscheduled
viewing
CHANNEL
BLOCK
Pmvent access
ce_a_ _anne_
With the CURRENT TIME SET menu open: cu.nEmT,MES_
I Press _. ____- ---AM
2 Press # or # untilthe current day is displayed. _MENU
Press _ to select.
3 Press t or t until the current hour and AM/PM is
displayed. Press (E_ to select _,,_ s_m e=,_
4 Press t or # until the current minute is displayed, press _.
The clock isset. Press MENU to exit.
Any loss ofpower will cause these seffings tobe erased.
With the ON/OFF TIMER menu open: Ot_OFFTIMER
1 Choose the ON/OFF TIMER you would like to set and ,, ....
--:-- AM J_ CH___
press _. 2 .....
2 Press t or 4 until the desired day or range of days is --:-- AM_ c.___
_MENU
displayed. Press _ to select Se=e_t"P°S_SUN 12:00A M
3 Indicate the time that you want the TV to turn on .o._=1 s..,=_ e.,_
(hour, then minutes) by pressing t or t and then _.
4 Set the time duration (maximum of 6 hours) by pressing t or _-and then _.
5 Press _ or 4Funtil you reach the desired channel. Press _ to select.
The ON/OFF TIMER is now set. Press MENU to exit.
When you perform AUTO PROGRAM, aft ON/OFF TIMER settings will be erased.
You willbe able to block two channels for a period of up to 12 hours.
FOLLOW STEPS 1-5 OF ON/OFF TIMER ABOVE IC_*N_"_E_L_e'=ccK
--:_ AM__h CH___
To erase your CHANNEL BLOCK settings, press RESET 2 ___
.... AM__ CH___
whilein the CHANNEL BLOCK window. Performing AUTO _.E.u
PROGRAM will erase your CHANNEL BLOCK settings. Se_¢1= P°_tI°_SUN 12:00#M
MC_e_B SehK_G_ ExitS_
23