Filter
Top Products
Air Conditioner Features
(continued)
HEATING FEATURE
(on
some
models)
:
YOU WILL SEE
:
If the
display reads “F1”
a sensor has failed.
If the display reads “F2”
a sensor has failed.
If the display reads “F4”
a sensor has failed.
If the display reads “FJ”
a sensor has failed.
DO THIS:
PRESS
MODE BUTTON
SELECT HEAT
Note: This feature can be used with
any combination of FAN Speeds, Timer, or Sleep Modes. When in the “Heat” Mode, the
fan will run continuously while heat is needed. The temperature will automatically be maintained anywhere between 61°F
(16°C) and 86°F (30°C). When the set room temperature is reached, the fan will cycle off and on to circulate and sample
the room air.
FAULT CODES
SLEEP FEATURE : Y
OU
WILL SEE
DO THIS:
:
PRESS
MODE BUTTO
N
SELECT
SLEEP
Note: Press this button, Sleep On and Sleep Off can be selected. When the unit is on,Sleep Off is defaulted. After the unit is shut
off, the Sleep function is canceled. If the
unit is in Cool or Energy Saver Modes,
and the
Sleep Mode is set,
the
SET TEMP.
will
increase 2*F in 1 hour and 4*F in 2 hours. If the unit is in Heat Mode, and Sleep Mode is set, the SET TEMP. would decrease 2*F
in 1 hour and 4*F in 2 hours.
TO TURN UNIT OFF
:
YOU WILL SEE:
DO THIS:
PRESS
ON/OFF BUTTOT
12