Filter
Top Products
1)
Power On and Off
-
Press the ON/OFF (POWER) button once to manually turn the unit on. Press the Power button once
more to turn the unit off. When you manually power the unit on and off by pressing the ON/OFF button, the preset timer will
be cancelled.
2) Mode Selection
-
Press the MODE Button repeatedly to cycle between the different modes: Auto, Air Conditioner, Dehu-
midifier, and Fan only mode. Once a mode is selected, an arrow will light up on the LCD display next to the selected MODE
label on the remote. Auto mode automatically chooses the air conditioner, dehumidifier, or fan mode based on the current room
temperature.
3) Fan Speed
-
Press the FAN speed button to cycle through low, medium, and high fan speeds. The small fan icons will light up
depending on which speed is selected. The more fan icons light up, the higher the speed. The fan icons are located on the LCD
display next to the SPEED label.
4) Temperature Setting
-
When the unit is in Air Conditioner mode you can select your desired temperature. Press the TEMP
SELECT buttons (+ or -) to select your desired temperature setting. The temperature on the LCD display on the remote control
will increase or decrease accordingly. Hold the +/- buttons for two seconds to rapidly increase or decrease the temperature.
REMOTE CONTROL OPERATING INSTRUCTIONS
MODE
BUTTON
TEMP
SELECT BUTTONS
POWER
BUTTON
SWING
BUTTON
(Not Available on SG-PAC-10E5&KY-100E5)
TIMER
BUTTON
FAN
BUTTON
SLEEP
BUTTON
LCD
DISPLA
Y
and
MODE L
ABE
LS
NOTE
:
He
at
mode is not
a
v
ailable
on the SG
-PAC
-10E
5
NOTE
: HEAT MODE IS
NOT AVAILABLE
9
and KY-100E5