Filter
Top Products
5
5) Bucket Full - When the water bucket is full of water, the unit will automatically shut off , make a beeping
noise, and the Bucket Full Indicator will light up. The dehumidifier will not function until the water
bucket is emptied and placed back inside the unit. The bucket should be cleaned every few weeks to pre-
vent the growth of mold, mildew and bacteria. Use a mild detergent to clean the bucket. Once clean, com-
pletely dry the bucket and place it back inside the dehumidifier.
NOTE: When the bucket is full or removed from the machine, the compressor will turn off, but the fan
will continue to run for a few minutes. This is completely normal. The dehumidifier will not be remov-
ing moisture from the air at this time.
6) Replace Filter - When the filter needs to be replaced (after 250 hours of use), the filter indicator will
light up. Remove the filter and clean with warm, soapy water. Dry thoroughly before replacing the filter.
Once the filter is completely dry, place the filter back in the unit and press the FILTER button to reset the
filter indicator.
OPERATING INSTRUCTIONS
NOTE: Support bucket with
both hands when emptying
NOTE: Do not clean filter in dishwasher