Filter
Top Products
6
PARTS & ASSEMBLY
PARTS
EXHAUST HOSES (2 Included)
WINDOW KIT
WINDOW KIT
ASSEMBLY & INSTALLATION
INSTALLATION
When the unit is operating as an air conditioner, heater, or dehumidifier, the unit draws in fresh outdoor air and exhausts
hot air (or cold air in heat mode) out of the room to complete the air exchange. When the unit is operating in fan mode,
no outdoor air exchange takes place. The window kit and exhaust hose do not need to be installed when the unit is used
as a fan.
NOTE: The supplied window kit can be installed in sliding windows and sliding glass doors up to 8 ft. long
(approximate length).
MOUNTING THE EXHAUST HOSE
• Choose a suitable location, near a grounded electrical outlet and suitable window or door. Remove
packaging and locate components.
• Extend both ends of the exhaust hose approximately 6 inches.
• Screw the window kit adapter onto one end of the exhaust hose clockwise. Screw the hose adapter onto
the other end of the exhaust hose clockwise.
• Remove the outlet cover from the back of the unit by screwing them counter-clockwise, then lifting up.
• Mount the exhaust hose onto the back of the unit by locking the hose adapter into place.
HOSE ADAPTER HOSE ADAPTER HOSE ADAPTER
EXHAUST HOSE
WINDOW KIT
ADAPTER