Filter
Top Products
15
REMOTE CONTROL OPERATING INSTRUCTIONS
1) Power On and Off - If the unit is already on, press the POWER (I/O) button on the remote while
pointing the remote away from the unit. This will turn the remote on. If the unit is off, now press the
POWER (I/O) button once to manually turn the unit on. Press the Power button once more to turn the unit
off. When you press the POWER button the upper right square on the remote control LCD Display will
light up. When in Air Conditioner, Heating, and Auto mode, the selected temperature will appear on the
remote control display. When the unit is in Fan mode and Dehumidifier mode you will see the “- -” icon
instead of the set temperature. This shows that temperature selection is not available when the unit is in
Fan or Dehumidifier mode.
2) Mode Selection - Press the MODE Button repeatedly to cycle between the different modes: Auto, Air
Conditioner, Dehumidifier, Fan only, and Heater mode. The upper left square on the Remote control
display will light up showing which mode is selected. In Air Conditioner mode the display will show
“COOL”, in Heating mode the display will show “HEAT”, in Dehumidifier mode the display will show
“DRY”, in Fan mode the display will show “FAN”, and in Auto mode the display will show “AUTO”.
3) Fan Speed
- Press the FAN speed button to cycle through high, medium, and low fan speeds. The
display on the remote control will show High, Medium, Low, under the “SPEED” label on the remote
control LCD display. There is an additional auto speed setting that is enabled in only heating and cooling
modes. This speed is next setting after low when pressing the FAN speed button on the remote control.
The speeds will cycle through in this order: High, Medium, Low, Auto. Each change in speed will be
associated with a “beep” sound from the unit. The remote control will not display “AUTO” under the
speed label. Once Auto fan speed is selected the unit will beep and there will not be a fan speed displayed
on the remote control.
4) Temperature Setting
- When the unit is in Air Conditioner or Heating mode you can select your desired
temperature. Press the ▲ or ▼ to select your desired temperature setting. The temperature on the LCD
display on the remote control will increase or decrease accordingly. Pressing the ▼and ▲ buttons
simultaneously will change the temperature select between °F and °C.
5) SLEEP MODE - See “SLEEP MODE” on page 12.
6) SWING - To turn on the oscillation, press the SWING button on the remote control. Once you press
SWING, the louvers on the unit will oscillate up and down. The bottom left square of the remote control
display will show the “ “ icon when oscillation (SWING) is selected.
7) TIMER - To program the timer, first press the T-ON button. Once T-ON is pressed the auto-on timer will
blink in the bottom right rectangle of the remote control display. Press the MIN and HOUR buttons to
change the clock to the desired time for the unit to automatically turn on. The minutes will increase by 10
with each press of the MIN button and the hours will increase by 1 with each press of the HOUR button.
Press the T-OFF button and the remote control display will flash the desired auto-off timer. Press the MIN
and HOUR buttons to change the clock to the desired time for the unit to automatically turn off. The timer
is set when the auto-off time stops flashing and the words “ON” and “OFF” are displayed next to the time.
8) CLOCK
- To set the clock on the remote control, hold down either the MIN or HOUR button until the
displayed time flashes on the remote control display. Change the minutes by pressing the MIN button and
change the hours by pressing the HOUR button.