Filter
Top Products
9
OPERATING INSTRUCTIONS
CONTROL PANEL BUTTONS (Refer to the images on page 9)
1) Power On and Off
- Press the ON/OFF button once to manually turn the unit on. Press the ON/OFF
button once more to turn the unit off.
2) Mode Selection
- Press the MODE Button repeatedly to cycle between the different modes: Auto mode,
Air Conditioner, Dehumidifier, and Fan.
3) Fan Speed Control - Press the FAN SPEED Button to cycle through the different fan speeds: High,
Medium, and low. The fan speed can be visually distinguished by the speed of the digital air segments
progressing out from the windmill fan image on the Multi-color display. There is an additional auto speed
setting that is enabled in only heating and cooling modes. This speed is next setting after low when press-
ing the speed control button. The speeds will cycle through in this order: Low, Medium, High, Auto. Each
change in speed will be associated with a “beep” sound from the unit.
4) Set Temp- Select the desired temperature by pressing either ▼ or ▲ on the SET TEMP button when
using the unit in COOL or HEAT mode.
5) Timer - To program the timer, press the ▲ or ▼ buttons on the SET TIMER button to set the timer. To
set the unit to turn on automatically, turn the unit off and select the desired time for the unit to turn on. To
set the unit to turn off automatically, turn the unit on then set the timer to turn the unit off at the desired
time.
6)
Sleep - When the unit is running, press the SLEEP button once to start the sleep operation. Press the
SLEEP button once more to stop sleep operation.
NOTE: Sleep operation does not work when the unit is in AUTO mode