Filter
Top Products
10
OPERATING INSTRUCTIONS
CONTROL PANEL BUTTONS (Refer to the images on page 9)
1) Power On and Off - Press the POWER button once to manually turn the unit on. Press the POWER
button once more to turn the unit off.
2) Mode Selection
- Press the MODE Button repeatedly to cycle between the different modes: Auto mode,
Air Conditioner, Dehumidifier, Fan only, and Heater mode. Air Purifier Mode is a separate function, see
page 13 for Air Purifier Operation.
3) Fan Speed Control - Press the SPEED Button to cycle through the different fan speeds: High, Me-
dium, and low. The fan speed can be visually distinguished by the speed of the fan icon on the front panel.
There is an additional auto speed setting that is enabled in only heating and cooling modes. This speed is
next setting after low when pressing the speed control button. The speeds will cycle through in this order:
Low, Medium, High, Auto. Each change in speed will be associated with a “beep” sound from the unit.
4) Temperature - Select the desired temperature by pressing either ▼ or ▲ key when using the unit in
cooling or heating mode. The temperature indicator flashes to display the desired temperature setting. After
the temperature is set, the unit will display this temperature setting until it is changed by the user. The
Multi-color display shows temperature in Celsius or Fahrenheit. Pressing the °C/°F button will change the
temperature select between °C and °F.
5) Timer & Time+- To program the auto off timer, press the TIMER button until the display shows a flash-
ing
when the unit is on. Press the ▲ or ▼ buttons to change the clock to the desired time for the
unit to automatically turn off. To program the auto on timer, press the TIMER button when the unit is off.
Press the ▲ or ▼ buttons to change the clock to the desired time for the unit to automatically turn on. You
can also press the TIME+ to increase the operating time. The timer can be programmed while the unit is on
or off. Once the timer is programmed the timer icon will stop flashing and remain lit. It is suggested to use
the remote control for a more full featured clock timer function (1-12 AM/PM) .
NOTE: The timer will also remember your settings when it is set. If you set the timer while in Air Condition-
ing mode, the timer will automatically turn the unit on and off in air conditioning mode according to the de-
sired programmed times. The timer will also remember the temperature settings, fan speed, and oscillation set-
ting. The timer works when the unit is in Air Conditioner mode, Heating mode, Dehumidifier mode, Fan
mode, Auto mode, and Air Purifier Mode (see page 13 for Air Purifier Mode).
OPERATING THE UNIT USING THE CONTROL PANEL
Air Conditioner Mode
1) Install the exhaust hoses and window kit properly (see pages 5, 7 & 8).
2) Plug the Power Cord into an electrical outlet.
3) Turn on the unit by pressing the POWER button on the control panel.
4) Press the Mode button until the “ ” icon appears on the Multi-color display
5) Press the ▲ or ▼ buttons until the desired room temperature appears on the control panel
display. The temperature ranges from 61
°
F - 88
°
F (16
°
C - 31
°
C).