Filter
Top Products
5
OPERATING INSTRUCTIONS
1) FILL THE WATER RESERVOIR - Pull the water reservoir drawer out from the back of the unit and fill
the water reservoir by pouring water into the drawer. Once you are finished filling the reservoir, close the
drawer in the back of the unit. SEE FIGURE A BELOW.
2) POWER ON THE HumidiBreeze
- Plug the power cord into a three pronged grounded electrical outlet.
Once the unit is plugged in, press the power button to turn on the HumidiBreeze. When power is “ON” the
power button will light up blue in color. To turn off the HumidiBreeze, press the power button again.
When the HumidiBreeze is “OFF” the blue light on the button will shut off.
3) ADJUST THE HumidiBreeze POWER
- Turn the control dial counter-clockwise to increase the power
(increases misting power) Turn the control dial clockwise to decrease the power (decreases misting power).
SEE FIGURE B BELOW.
4) When the water bucket is empty, turn the unit off and refill the water bucket. DO NOT fill the water
bucket while the unit is on.
FIGURE A
FIGURE B
INCREASE HumidiBreeze POWER
DECREASE HumidiBreeze POWER