Soleus Air KY-36 Air Conditioner User Manual


 
9
OPERATION
Plug the power cord into a properly grounded outlet. Do not connect the unit to an outlet that is also being used for
other electrical appliances. The unit will beep after two seconds, then press the on/off button to begin operation.
COOLING
1. Press the Cool Mode Button to choose the cooling function.
2. Repeatedly press the Temperature Buttons to set the desired room temperature (from 64-86°F).
3. Press the Fan Speed Button to choose the desired fan speed.
4. Press the Swing Button to select a steady airflow or oscillation.
In order to improve cooling efficiency, draw the curtains in a room exposed to direct sunlight.
Do not place near a heat source.
DEHUMIDIFYING
1. Press the Dehumidify Mode Button to choose the dehumidifying function.
In the Dehumidifying Mode, the fan speed cannot be adjusted.
Ensure that the drain pan is properly placed in the unit.
When the unit is used as a dehumidifier only, do not use the exhaust duct.
Keep the windows and doors closed to aid in effectively dehumidifying the room.
HEATING
1. Press the Heat Mode Button to choose the heating function.
2. Repeatedly press the Temperature Buttons to set the desired room temperature (from 64-86°F).
3. Press the Fan Speed Button to choose the desired fan speed.
4. Press the Swing Button to select a steady airflow or oscillation.
FANNING
1. Press the Fan Mode Button to choose the fanning function.
2. Press the Fan Speed Button to choose the desired fan speed.
3. Press the Swing Button to select a steady airflow or oscillation.
SETTING THE TIMER
When the unit is operating, the timer can be used to set an automatic shut off time. Also, when the unit is plugged in but turned
off, the timer can be used to set an automatic start time. If the timer button is not pressed, the unit will work continuously.
1. Press the Timer Button once.
2. Press the Adjustment Buttons until the desired number of hours is displayed (1-24 hours). The display will flash for 5
seconds indicating the timer is set successfully.
NOTE:
If the unit is turned off during cooling, dehumidifying, or heating and then restarted, there will be a 3 minute delay
before the compressor will turn back on to prolong the life of the compressor.