Filter
Top Products
NOTE: Donot use the exhaust duct when theunit isrunning at dehumidifying model. You must remove
theexhaust duct from the unit. When the unit isrunning at dehumidifying mode, the Panspeedcannot be
adjusted.
Keep the windows and the doors closed to aid the effectiveness of the unit in removing the moisture
fromthe room.
3) Fan Operation
a) Plug the Power Cord to the power outlet.
b) Turn on the unit bypressing the On!OffButton on the control panel.
c) Press the Mode Button until DFANDappears on the LCD display.
d) Select the Pan speed by pressing the Fan Speed Button.
NOTE: When the unit is running on Pan mode, the exhaust duct is inoperative and is not required.
OPERATION USING REMOTE CONTROLLER
The remote controller provided with the unit may operate this portable air conditioner. The remote
controller uses two -AAA batteries (provided). Install the batteries before using the remote controller.
NOTE: The information displayed on theLCD of the remote controller will only be transmitted to the
air conditioner when the On!Off, Transmit, Sleep or Auto buttons (transmitting buttons) are pressed.
Any changes made to theLCD display will bereversed to theprevious setting if none of thetransmitting
buttons is pressed within 15 seconds after the changes are made.
NOTE: When the remote controller is off, the LCD only displays the current time.
-8-