Filter
Top Products
- 6 -
◆Remote Control Operation (Continued)
The General Procedure:
1. Press ON/OFF button to start the unit.
2. Press MODE button to select the suitable operation mode.
3. Press SWING button to swing. It will stop when pressed again.
4. Press FAN button to set desired fan speed.
5. Press +/- button to set desired temperature.
The Selected Procedure:
6. Press SLEEP button to set timer.
7. Press ON/OFF button to set desired temperature.
Note:
In AUTO mode, the unit will automatically adjust its running modes according to the room
temperature.
◆How to Insert Batteries
The remote control uses two AAA batteries.
1. Remove the cover from the back of the remote control and insert two new batteries.
2. Re-attach the cover.
Note:
• Don’t mix new and used or different types of batteries.
• Remove batteries when the remote control is not in use for a long time.
• Keep remote at least 3.28 feet from TV’s and other electronic devices.
When the wireless remote control is lost or broken, please use the manual switch,
It will start in AUTO mode, the temperature setting and fan speed cannot
be changed. Please use a ball point pen or similar device to operate switch.
Turn on the unit: By pressing the Manual Switch the unit will start in AUTO automatically.
The microcomputer will adjust to the indoor temperature by selecting (COOL, HEAT, FAN), in order to
achieve a comfortable condition.
• Turn off the unit: When unit is running, press the manual switch STOP button, the unit will stop running.