Filter
Top Products
To raise the temperature:
Press the plus button to raise the temperature. Each time you
press or hold the plus button, the temperature will go up 1º until it
reaches 86°F (30°C).
To lower the temperature:
Press the minus button to lower the temperature. Each time you
press or hold the minus button, the temperature will go down 1º
until it reaches 64°F (18°C).
To set Timer for a 1- to 24-hour delay before air conditioner is
turned off (air conditioner must be On):
1. Press TIMER. Indicator light on air conditioner control panel
will flash.
TIMER
2. Press the plus or minus button to change the delay time from
1 to 24 hours.
3. Press TIMER again or wait 10 seconds. Indicator light on air
conditioner control panel will remain on.
To set Timer to turn on air conditioner, keeping previous
settings:
1. Turn off air conditioner.
2. Press TIMER. Indicator light on air conditioner control panel
will flash.
3. Press the plus or minus button to change delay time (1 to
24hours).
4. Press TIMER again or wait 10 seconds. Indicator light on air
conditioner control panel will remain on.
To set Timer to turn on air conditioner, changing the
previous settings:
1. Turn on air conditioner.
2. Adjust Mode to Cool, Fan Only, or Power Saver.
3. Adjust Fan Speed to Turbo, High or Low, or Auto.
4. Adjust temperature between 64°F (18ºC) and 86°F (30ºC).
5. Turn off air conditioner.
6. Press TIMER. Indicator light on air conditioner control panel
will flash.
7. Press the plus or minus button to change delay time (1 to
24hours).
8. Press TIMER again or wait 10 seconds. Indicator light on air
conditioner control panel will remain on.
Starting Your Air Conditioner—
Rotary Control
CONTROL PANEL
1. Set exhaust control. See “Exhaust Control (on some
models).”
2. Select the fan speed. See “Fan Speed.”
3. Set temperature. See “Temperature.”
Exhaust Control (on some models)
1. The Exhaust control CLOSED for maximum continuous
cooling. The Exhaust control set to OPEN allows you to draw
stale or smoky air from the room.
• Open—to exhaust room air to the outside.
• Closed—to circulate room air.
CLOSED
OPEN
NOTE: The Exhaust control will function only when the Fan
Speed is operating.
10