Filter
Top Products
7
OPERATING INSTRUCTIONS
CONTROL PANEL OPERATION
1. Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet. Only operate
heater in upright position with caster wheels attached.
2. Turn the heater on by pressing the On/Off button on the control panel.
3. Select a heat setting:
On the control panel, press the MODE button to toggle between the two heat settings; LOW (750W) and
HIGH (1500W) .
4. Adjust the thermostat by pressing the arrows on the control panel. The digital readout will display the
selected temperature.
5. Once you have chosen the desired temperature, the heater will remain on until the room temperature
increases to the temperature on the digital display. The heater will cycle on and off to maintain the desired
room temperature.
6. This heater is equipped with a 12-hour automatic shut-off timer. To activate the timer, press the TIMER
button on the control panel. Each press of the timer button will increase the heater operating time by one
hour. The digital readout will display the number of hours you have selected. To turn off the timer, simply
press the TIMER button until the digital readout displays your current selected temperature.
7. The indication lights on the control panel communicate how the product is operating. The POWER light
will turn-on when the unit is operating. The TIMER light will turn on when the timer has been activated.
8. Unplug the heater when not in use.
Timer Select Button
Temperature Select Buttons
Mode Select Button
On/Off Button (Power)
Temperature & Timer
Display
Indication Lights
www.sylvane.com (800) 934-9194