Filter
Top Products
7
6. The indication lights on the control panel communicate how the product is operating.
The POWER light will turn-on when the unit is operating. The TIMER light will turn on
when the timer has been activated. When choosing between High, Low, and ECO modes
the corresponding lights will turn on according to the mode that has been selected.
7. Unplug the heater when not in use.
NOTE: For safety, if the heater’s internal temperature rises above a certain point, the heater
is designed to automatically shut off. To restart the heater in this situation:
1. Turn the Heater off by pressing the On/Off button.
2. Unplug the power cord from the outlet and allow the heater to cool for at least 10
minutes.
3. Plug the power cord back into the outlet and select the desired heat setting.
WARNING: It is normal for the power cord to feel warm to the touch; however, a loose fit
between the outlet and the plug may cause overheating of the plug. If this occurs, try inserting
the plug into a different outlet. Contact a qualified electrician to inspect the original outlet for
damage.