Filter
Top Products
6
ASSEMBLY
1. Remove the heater body, two wheelbases, wheels, screws, and washers from the box. Remove the pack-
aging materials and keep for future storage.
2. Attach the wheels to each wheelbase with the supplied wheel screws, small black spring-washers, and
small grey washers.
3. Be certain the heater is unplugged and the controls are set to off. Set the heater on the floor upside down.
4. Attach a wheel base (with wheels attached) to each end of the heater body using the supplied standard
screws, large black spring-washers, and large grey washers.
SMALL BLACK SPRING WASHER
SMALL GREY WASHER
WHEEL BASE
WHEEL SCREW
WHEEL
LARGE BLACK SPRING WASHER
LARGE GREY WASHER
STANDARD SCREW
WHEEL BASE
MICATHERMIC HEATER