Filter
Top Products
6
ASSEMBLY - REMOVING THE HEATER FROM THE PACKAGING
Remove the heater from the box.
NOTE: Product drawings may slightly differ from
actual product. Assembly and packaging are the
same as depicted in the drawings
Remove the Styrofoam from both ends of
the heater, and remove the plastic bag.
Remove the 2 remaining bags from the box..
One bag contains: feet with casters. [Fig 1]
The other bag contains:
1 mounting support, 4 screws and 4 drywall
anchors for wall mounting. [Fig 2]
Save the packaging for storing the heater
while it is not in use or during summer
months.
Note: If any part is damaged or missing, do
not use or attempt installation. Contact cus-
tomer service for a replacement.