Filter
Top Products
5
OPERATING INSTRUCTIONS
Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet.
Only operate the heater when it is in the upright position.
Use the instructions below to operate the heater using the control panel or the included remote
control.
1. Open the control panel cover to view the control dials.
2. The control dial on the left (when facing the front of the heater) is the heat setting dial.
When the dial is set to “0” the heater is in the off position.
3. To turn the heat on fan mode, turn the heat setting dial to the five bladed fan icon. This will
turn on the fan and circulate cool air. When in fan mode, turn the thermostat dial (on the
right when facing the front of the heater) to max to circulate air.
4. Turn the heater dial to the “ ~ “ position to heat in low mode. To regulate the room
temperature, turn the thermostat dial to the right until the heater turns on. This thermostat
setting will be slightly above room temperature. The heater will shut off when the room
reaches the set temperature on the thermostat. Once the room temperature drops below the
thermostat temperature, the heater will automatically turn itself on. The heater will continue
to turn on and off to regulate the room temperature. Increase the thermostat dial until you
reach the desired comfort setting.
5. Turn the heater dial to the “ ≈ “ position to heat in high mode. To regulate the room
temperature, turn the thermostat dial to the right until the heater turns on. This thermostat
setting will be slightly above room temperature. The heater will shut off when the room
reaches the set temperature on the thermostat. Once the room temperature drops below the
thermostat temperature, the heater will automatically turn itself on. The heater will continue
to turn on and off to regulate the room temperature. Increase the thermostat dial until you
reach the desired comfort setting.
6. For maximum heating power, turn the heater dial to high mode “ ≈ “ , and turn the
thermostat dial to max.