Filter
Top Products
5
PREPARING FOR INSTALLATION
Installation Tips
For wood-frame casement windows: It may be necessary to construct a frame, using at least 1-inch thick wood, with a
15-1/2-inch wide opening.
For brick or cement building construction: It may be necessary to put a wood stool strip under AC, for mounting pur-
poses.
Tools Required:
• Flat-head screwdriver
• Phillips-head screwdriver
• Carpenter's level
• Tape measure
• Fine tooth saw
• Electric or hand drill
• Knife and scissors
• Pencil
DISCLAIMER
ALL INFORMATION AND THE TECHNICAL SPECIFICATIONS PRESENTED IN THIS USER’S MANUAL ARE THE
PRESENTATION OF THE MANUFACTURER. SOLEUS INTERNATIONAL HAS NOT CONDUCTED INDEPENDENT
TEST TO THE INFORMATION AND THE SPECIFICATIONS PRESENTED HEREWITHIN.
PREPARING FOR INSTALLATION
WARNING: Failure to adhere to the following precautions could result in personal injury and product
damage.
• Because this unit weighs about 88 to 105 pounds, it is recommended that you have someone help you when install
your new unit, and that you both use proper lifting techniques.
• Inspect the condition of the window where unit will be installed. Be sure it will support the weight of the unit.
• This appliance must be installed according to all applicable codes and ordinances.
• Handle AC with care. AVOID sharp metal fins on front and rear coils.
• Make sure your AC does not fall during installation.
• Do not use water collected in the unit for drinking. It is not sanitary.