Filter
Top Products
4
igura No 1
PRODUCT DIAGRAM & ASSEMBLY
1. In this box you will find: 1 - Fan head with Legs attached, 2 - Base Screws,
1 - Base Connector, and 1 - Tilt Knob
2. To assemble the fan, connect the Base Connector to the ends of the legs attached
to the fan.
3. Once the Base Connector is attached, use the Base Screws to secure the Base
Connector to the Legs.
4. Once the Base Connector is securely attached, you are ready to use the fan.
Fan Head and Legs
Base Screws
Base
Connector
Control
Dial