Filter
Top Products
5
OPERATING INSTRUCTIONS
Set the fan on a stable, level surface. Plug the cord into a standard 120V A/C outlet.
The numbers in (parentheses) refer to Fig. 2 on the next page.
POWERING ON THE FAN (1)
The fan can be turned on by pressing the POWER button on the fan control panel or using the
supplied remote control. The POWER button is also used to turn the fan off.
FAN SPEED (2)
Press the SPEED button to select Low (L), Medium (M), or High (H) fan speed.
OSCILLATION (3)
The fan can operate in oscillation or stationary mode. Press the OSCILLATE button on the
control panel or remote control to start oscillation. To turn Oscillation off, simply press the
OSCILLATE button once more.
WIND MODES (4)
Press the MODE button on the fan control panel or remote to select one of the three wind
modes. When the fan is initially powered-on, the default wind mode (normal) is selected. Press
the MODE button once to select Natural wind mode (M1), and twice to select Rhythm wind
mode (M2). During Natural wind mode, the fan will simulate the airflow of the wind by
randomly cycling through its 3 fan speeds. Rhythm wind mode will cycle through the fan
speeds in order of Low, Medium, and High.
TIMER (5)
The fan can be programmed to automatically shut-off after a set period of time. The timer can
be set for 30 minute increments. The maximum programmed time is 7.5 hours. To start the
Timer, press the TIMER button on the control panel or the supplied remote. Each press of the
TIMER button will increase the timer by 30 minutes. Once the Timer button is pressed, a green
LED light on the front of the fan will light up according to the selected time. If more than one
LED light is lit, the timer is programmed for the sum of the times represented by the LED
lights. If all timer lights are lit, then the fan will be programmed for the maximum 7.5 hours.