Filter
Top Products
©Slant/Fin Corp.
SLANT/FIN CORPORA
TION, Greenvale, N.Y. 11548 • Phone: (516) 484-2600
FAX: (516) 484-5921 • Canada: Slant/Fin LTD/LTEE, Mississauga, Ontario
www
.slantfin.com
R
ef Description Slant/Fin Part # Heat Fab Part #
80 12” Long Vent Adapter 660547 7302FIN
— 6” Long Vent Pipe 440671 7301GC
— 12” Long Vent Pipe 440672 7302GC
— 18” Long Vent Pipe 440673 7304GC
— 24” Long Vent Pipe 440674 7305GC
— 36” Long Vent Pipe 440675 7307GC
— 48” Long Vent Pipe 440676 7308GC
— Tee (For Drain) 440686 7316GC
— Drain Tee Cover 440687 7317GCD
— In-line Cond. Drain* 440677 7320GC
84 Screen Term. Tee 440683 7390TEE
85 Screen Term. Straight 660548 7392GC
— Screen Term. Elbow 440678 7314TERM
— 90° Elbow (Standard) 440682 7314GC
83 90° Elbow (Tight Radius) 651310 SF651310
— 45° Elbow 440681 7311GC
— 18” Slip-Joint Connector 440684 7324GC
— Support, 6” Clearance 440679 7323GCC
— Support, 2” Clearance 440692 7323GC2
— Support Clamp 440680 4327SS
— Firestop 440685 5318CI
86 GE-RTV 106, 3 oz. Tube 440690
— Dow-Corning 732, 3 oz. Tube 440691
— Dow-Corning 732, 10 oz. Cartridge 440693
3
” DIAMETER SAF-T VENT SYSTEM (AL 29-4C STAINLESS STEEL)
OPTIONAL VENT SYSTEM PARTS AND KITS
Horizontal Venting Vent Terminal Kit
(Standard)
Part No. 651702
Includes Ref #
80, 81, 82, 83, 86, 88, 89, 91, 92, 93
SEALANTS FOR VENT SYSTEM
81 24” Long Pipe (Schedule 40) 651316
82 Coupling (Schedule 40) 651315
88 Coupling (Sewer and Drain) 660571
89 90° Elbow (Schedule 40) 660577
90 90° Street Elbow (Schedule 40) 660578
3” PVC FOR AIR INTAKE SYSTEM
91 Vent Terminal (Stainless) 665020
92 Indoor Wall Plate 665119
93 Wall Passage Thimble† 660539
94 3” Air Inlet Screen (Stainless) 660236
SLANT/FIN MANUFACTURED VENT SYSTEM PARTS
— Wall Passage Thimble 440695
Vertical Venting Roof Termination Kit
(Optional)
Part No. 665192
Includes Ref # 85, 86, 88, 89, 90, 94
* In-line condensate drain can be used as an alternate to the combination of drain tee
and cover. A
1
⁄2” I.D. drain tube is required for this part.
† For use with vent terminal only. For installations where vent terminal is
not used, wall passage requires thimble listed below, in conjunction with
a slip-joint connector.