7
Replacement Parts and Service
If you need parts or service to maintain the superior performance of
your FlowThru Humidier, follow these procedures:
Contact the heating and air conditioning contractor who installed
your unit. You may nd this information stamped on the back cover
of this booklet, or on a label attached to your humidier or heating
system.
If this information is unavailable, look in the phone book or on the
Internet under “Heating and Air Conditioning Contractors”.
Finally, if these attempts for parts or service fail, write, call or email
Skuttle at:
Skuttle Indoor Air Quality Products
101 Margaret Street, Marietta, OH 45750
800-848-9786 or 740-373-9169
customerservice@skuttle.com
•
•
•
Homeowner Tips
In a home that has had little or no humidication, allow approximately
three weeks for your new humidier to reach the desired humidity
level. Your furniture, woodwork, carpeting, plaster, houseplants and
family members all need time to absorb lost moisture. To eliminate
drafts that allow heat and humidied air to escape, keep replace
dampers closed when not in use.
If excessive moisture appears on windows or walls, reduce the
humidity setting on your humidistat. If the situation continues, turn off
the water valve and consult your HVAC contractor.
•
•
See Flow-Thu Humidie pat lists and diagams,
beginning on page 8.