Filter
Top Products
49
26.TABLE OF CHANGED PARTS
AND SERIAL NOS. TO WHICH CHANGE–OVER OF PARTS IS EXECUTED (3)
#9
UL :100001 202984
CE :200001
200598
SAA:201001
201074
UL :202985
CE :200599
SAA:201075
17’
UL :201823
CE :200001
SAA:201001
UL :100001 201822
CE :NO
SAA:NO
#10
388157
P15–18
18’ 42’ 387392388158
P15–42 P5–17
SERIAL NO
SERIAL NO
THREAD GUIDE NO.1
NEEDLE THREAD
DETECTION SHIELD
PLATE
NEEDLE THREAD
DETECTION CIRCUIT
BOARD(ASM.)
INSULATING SHEET
P5–72 P5–73 P5–77 P5–74
72’ 388120 73’ 388121 77’ 388122 74’ 388123
SERIAL NO
UL :202985
CE :200599
SAA:201075
#12
388149
P23–3
3’ 10’ 388150
P23–10
UL :100001
202984
CE :200001
200598
SAA:201001
201074
ROTATING HOOK
(PARTIAL ASM.)
HOOK SHAFT(ASM.)
FACE PLATE(ASM.) FACE PLATE THREATING BODY
72 387742 73 387999 77 388004 74 388005
388159 38816018” 42” 17
17’CAN BE USED
WITH ALL SERIAL NOS.
42’:(NOTE 2)
18”:FOR OLD THREADING
BODY
P15–36 FACE PLATE
REINFORCING
PLATE IS 388143
NOTE 1.UL:FOR SERIAL NO.100001
201822,WHEN REPLACING 18”388159 FACE PLATE(ASM.),
IT IS NECESSARY TO REARRANGE P15–36 FACE PLATE FIXING PLATE
WITH 387762(PART ATTACHED TO THE SEWING MACHINE).(SEE #3)
387674
NOTE 2.18”AND 42”:SOME PART OF SHAPE OF 388158 IS CHANGED FOR OLD THREADING BODY.
#11
UL :100001 202984
CE :NO
SAA:NO
UL :202985
CE :200001
SAA:201001
387788
388154
P21–61P23–19
SERIAL NO
19’ 58 388146
19 61 387563
BOBBIN THREAD
MECHANISM BASE
HOOK DRIVING SHAFT DEFLECTION
PREVENTION COMPONENTS
HOOK DRIVING
SHAFT(ASM.)
P23–54 387569 HOOK DRIVING SHAFT
SUPPORT OF HOOK
P23–55 283491 SCREW
69
70
71
72
388152 HOOK DRIVING SHAFT A FIXING PLATE
388153 HOOK DRIVING SHAFT A
283470 SCREW
388151 SCREW
REPLACEMENT OF SINGLE PART IS NOT POSSIBLE
REPLACE WITH 3’AND 10’AS A SET.
19’:HOOK DRIVING SHAFT
SUPPORT A IS ADDED.
58’:HOOK DRIVING SHAFT
SUPPORT B(ASM.)
IS ADDED.
P23
3881524
388147
71 70 69 72