A SERVICE OF

logo

TS+ TS380+
Table of Contents Previous Page | Next Page
17
THREADING PATH C continued...
Thread needle from front to back.
• Draw thread to left.
PREPARATION
FOR FORMING THREAD CHAIN
• Lower needle clamp body to lowest position.
Collect the three threaded threads and
place them under presser foot.
FORMING THREAD CHAIN
Hold thread ends at 30 to needle. (towards
left rear corner).
• Turn handwheel about 8 times to form
thread chain.
• If chain will not form check threading.
After producing chain, start to sew on your
fabric.