Filter
Top Products
27
MULTI-STITCH ZIG ZAG
Mending, overcasting, joining or reinforcing can all be
done using the Multi-Stitch Zig-Zag.
MENDING A TEAR
• Trim ragged edges of tear.
• Cut a lining of fabric for reinforcement.
• Bring the edges of tear together and baste lining to
wrong side of fabric.
RECOMMENDED SETTINGS
Stitch Selection: Multi-Stitch Zig-Zag
Stitch Width:
Stitch Length:
Foot: Special Purpose (J)
Needle Plate: General Purpose(A)
• Place tear, right side up, under presser foot.
• Stitch over the line of the tear, shortening stitch
length at each end for reinforcement.
• Trim thread ends close to fabric.
• If needed, sew over tear again.
• Trim away lining close to stitching.