Filter
Top Products
EDGE JOINING FOOT
This foot is used to apply lace edgings.
1. Snap on the Edge Joining Foot. Press in the 5/8 of an inch seam allowance on the fabric, but
leave the lace edging flat.
2. Slip the fabric and lace right side up under the presser foot, so that the inseam edges meet at
the center of the foot, along the guide.
3. Begin sewing, keeping your fabric pieces aligned with the center guide of the foot.
* The Edge Joining Foot is an optional accessory.
5
3.0~4.0
B-14 A-15
This foot provides a more visible view of the area that you will be stitching. Because of its open
area at the front, you can see markings much more easily.
1. Set machine to desired stitch.
2. With a marking pencil or chalk, trace the outline for your design or pattern on the right side of
the garment. Hint: Use a marker that can be removed easily in case the stitching does not cover
it completely.
3. Sew, following the outline you have traced onto your fabric.
* The Open Toe Foot is an optional accessory.
OPEN TOE FOOT
59
This foot gives a perfect 1/4" seam guideline, which is used in piecing quilt blocks.
1. Keep the fabric's edge even with the foot's right edge.
2. Iron the seams flat, ensuring precision of your work and better alignment of all corners. All
seam allowances should be positioned in one direction.
* The 1/4" Piecing Foot is an optional accessory.
1/4" PIECING FOOT
1