Filter
Top Products
Junior Miss 67B
Table of Contents Previous Page | Next Page
11
How to change the Needle
When your needle becomes blunt or bent,
change it right away. Use only a Style
No. 2020 (15 x 1) needle, size 14.
1. Be sure the On-OFF Power Switch is in
the OFF position.
2. Turn hand wheel until the take-up lever is
raised to its top position.
3. Lower the presser foot.
4. Loosen the screw and take out the old
needle.
5. Insert a new needle. Make sure flat side of
needle is toward back of machine. Then
push it up as far as it will go and tighten
the screw.