Filter
Top Products
43
The Even Feed Foot Accessory
Always try to sew first without the Even Feed Foot accessory
which should be used only when necessary.
It is easier to guide the fabric and you have a better view of the
seam when using the standard, regular foot on your machine. Your
sewing machine offers excellent stitch quality on a wide range of
fabrics from delicate chiffons to multiple layers of denim.
The Even Feed Foot accessory equalizes the feeding of the upper
and lower layers of fabric and improves the matching of plaids,
stripes and patterns. It also helps to prevent uneven feeding of
very difficult fabrics.
1. Lift the presser foot lifter to raise the presser foot bar (a).
2. Remove the presser foot shank by unscrewing (counter-
clockwise) the presser bar attaching screw (b).
3. Attach the Even Feed Foot to the machine as follows:
i) The arm (c) should fit into above the needle screw and
clamp (d).
ii) Slide the plastic attaching head (e) from your left to right so
that it is fitted into the presser foot bar.
iii) Lower the presser foot bar (a).
iv)Replace and tighten (clockwise) the presser bar attaching
screw (b).
4. Make sure both the needle screw (d) and the presser bar
attaching screw (b) are tightly secured.
5. Draw the bobbin thread up and place both the bobbin thread and
the needle thread behind the Even Feed Foot attachment.
a. Presser foot bar
b. Presser bar attaching screw
c. Arm
d. Needle screw & clamp
e. Attaching head
f. Needle bar
c
e
b
d
a
c
EN
f