Filter
Top Products
The table below is meant as a guiding principle for the user. Always test the optimum speed in
each case. Always start at low speed and then increase the speed.
Speed Use Recommended Disc
160–200 Grinding screed and leveling compounds Sand paper
200-300 Grinding parquet, removing leveling compounds
and adhesive residues
Carbide grinding disc and
Milling disc
300-400 Removing leveling compounds Milling disc
Always remove discs after work.
Always disconnect the power cord after work or when leaving the machine.
Transportation
For transportation, fold the handle forwards.
For carrying the machine, use the grips at the
front and at the back.
6.0 Vacuum Unit for the Mambo Surface Prep
Mounting the Vacuum Micropac
Assemble the vacuum unit from the front of the
Handle of the machine.
- Insert vacuum into the lower support
- Turn vacuum at the top against the handle.
Engage fixing pin.
- Fasten hose to the vacuum by turning
clockwise.
- Attach hose to the outlet spigot of the
machine.
7