Filter
Top Products
21
PRobleM solVIng gUIDe
Unclogging the Nozzle and Hose
WARNING! To Reduce the Risk of Electrical
Shock or Injury From Moving Parts, Unplug
Before Servicing or Cleaning.
The hose located on the back of the vacuum
carries the dirt from the nozzle to the
vacuum bag. The hose also functions as
the attachment cleaning hose. First check
to see that a bag is properly installed.
If the Hose Should Become Clogged
• Pull out and turn the lid of the cleaning
attachment opening. Remove the clog
or blockage.
• Remove the hose cuff from the nozzle inlet
and check for a clog.
• Turn the unit over and remove the bottom
plate (See “Removing and Reinstalling the
Bottom Plate”). Check the nozzle inlet tube
for obstructions. Clear tube and reinstall
the bottom plate.
Inlet Tube