Filter
Top Products
17
Replacing the Foam Secondary Filter
The secondary filter protects the motor
from dust and dirt. Before installing a new
vacuum bag, check the filter. Accumulated
dirt in the bag compartment will be
collected on this filter and may restrict motor
performance when the filter becomes dirty.
• Open the bag compartment lid and locate
the secondary filter on the bottom of the
bag compartment.
• Remove the secondary filter from the
bottom of the bag compartment.
• The foam secondary filter can be washed
and reused. If washed, make sure the filter
is completely dry before reinstalling.
• Insert the washed or new filter by sliding it
under the bag support.
• Close the bag compartment lid.
MAIntenAnCe AnD CARe