Simplicity F3300C Vacuum Cleaner User Manual


 
10
11
Vacuum Features
On/Off Switch
NOTE: There are three different on/off switch
configurations depending on the model you
own. Identify your vacuum cleaner model and
see the corresponding on/off switch operating
instructions below.
Models: F3300 and F3300C –
On/Off switch on base:
Locate the switch on the back side of the nozzle
to the left of the handle tube (see figure 10).
Simply press the switch with your foot to turn
the vacuum on or off.
Machine should be turned off before returning
handle to full upright position. Always turn the
vacuum cleaner off before unplugging it from the
electrical outlet.
Models: F3500 and F3500C –
On/Off switch on handle:
Locate the switch on the top of the vacuum
handle. Using your thumb, push the switch
forward to turn the machine on and pull
the switch backward to turn the machine
off (see figure 11).
Machine should be turned off before returning
handle to full upright position. Always turn the
vacuum cleaner off before unplugging it from the
electrical outlet.
Models: F3600, F3700 and F3700C –
On/Off two speed switch on handle:
The switch for these models, located on the
vacuum handle, is a three-way switch. The
middle position is the off setting, the rear
position is the on setting and the forward
position is for maximum power (see figure 12).
Use the maximum power setting for carpet
cleaning and the on setting for cleaning bare
floors and throw rugs.
Fig. 10
Fig. 11
Fig. 12
Vacuum Features
On/Off two speed switch on handle cont.
Pull the switch backward to turn the vacuum on.
Push the switch halfway back to turn the vacuum
off. Push the switch all the way forward to use the
maximum power setting.
Machine should be turned off before returning handle
to full upright position. Always turn the vacuum cleaner
off before unplugging it from the electrical outlet.
Edge Cleaning
The edge cleaning feature provides improved cleaning
near walls and stationary furniture. For maximum edge
cleaning, place the left side of the nozzle against the
wall or stationary furniture.
Automatic Carpet Height Adjustment
Your Freedom vacuum is designed with an automatic,
self-adjusting nozzle. No manual adjustments are
required. The height of the nozzle is instantly and
automatically adjusted to the flooring surface. This self-
adjusting feature allows the nozzle to float evenly over
all flooring surfaces.
Bare Floor Cleaning - Models F3600, F3700
and F3700C
The F3600, F3700 and F3700C models come
equipped with a squeegee on the bottom of the
vacuum to improve its effectiveness in cleaning bare
floors. When cleaning tile, hardwood, linoleum, etc.,
use the on setting, as opposed to the maximum
power setting, for best results (see figure 13).
Fig. 13