Filter
Top Products
1-3About the SX-2000U2
Users Manual
1.3 Hardware specification
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, it may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV technician for assistance.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
EN55022 Class-B
EN55024
Operating environment : Temperature:+10°C to +35°C, +50°F to +95°F
Humidity:20% to 80%
Storage environment : Temperature:-10°C to +50°C, +14°F to +122°F
Humidity:20% to 90%
EMI : VCCI Class B / FCC Class B / EN55022 Class B / EN55024
CPU : 32bit RISC CPU
Memory : RAM: 8MByte / FlashROM:2MByte
Network interface : 10BASE-T/100BASE-TX 1 port.(automatic detection)
Device interface : USB2.0 Hi-Speed(A Type): 1 port
Others : Push Swtich:1 button
LED: STATUS LED (Orange), LINK LED (Green)