Filter
Top Products
Before You Start
Install the Battery
1. Using slight finger pressure, slide the battery
compartment cover towards you to remove it.
2. Insert the battery into the battery compartment,
making sure the connectors align.
3. Replace the back cover, pressing down gently
until the cover clicks into place.
Charge the Battery
1. Plug the micro-USB cable into the device.
2. Plug the other end of the cable into the
AC adapter and plug the adapter into an
electrical outlet.
3. Charge until the battery charge indicator
shows the battery is fully charged ( ).
Get Ready
1. Make sure you are in an area covered by
the Sprint 3G, 4G, or 4G LTE network
(not roaming).
2. If you have a LAN connection, disconnect it.
3. Make sure your computer’s Wi-Fi (wireless
network connection) mode is turned on.
4. Make sure your device is set up on your
Sprint account. (Sign on to your account
at sprint.com to verify.)