Filter
Top Products
Installation Instructions
1. Remove the old showerhead. Cover
the shower arm with a piece of cloth
and hold vice-grip pliers securely to
the shower arm, approximately one
inch above the showerhead attach
-
ment nut. Using a crescent wrench,
securely grip the showerhead attach
-
ment nut. Turn the crescent wrench
slowly in a counterclockwise direc
-
tion, maintaining a firm grip. Remove
the showerhead from the shower arm.
See Figure 1.
2. Thoroughly clean the threaded area of
the existing shower arm using a wire
brush or steel wool. See Figure 2.
3. Turn on the water and let it run for
5 to 10 seconds. The water pressure
flushes out the remaining residue in
the pipe. See Figure 3.
Figure 1
Figure 2
Figure 3