Filter
Top Products
E-16
TROUBLESHOOTING
Problem
WHAT TO DO
The Plasmacluster Ion Generator
does not work.
•
Is the Car Adapter connected properly?
Please be sure it is defi nitely connected.
•
Does not a fuse blow?
Replace with a new fuse. (See E-15)
Flashing
faster (red)
Flashing (blue)
It is over the exchange period of
Plasmacluster
Ion Generating Unit
.
Replace with new Plasmacluster Ion Generating
Unit
. (See E-14)
Plasmacluster Ions are not released.
Press the Mode Button and restart.
Clean the electrode section of the unit. (See
E-13)
Is the Plasmacluster Ion Generating Unit installed
correctly? (See E-13,14)
Remove the unit, fully inserted again and press
the Mode button.
UNIT
UNIT
FILTER
CLEAN
UNIT
Flashing (red)
Flashing (blue)
The discharged air has odor.
• Filter is getting dirty.
Clean the fi lter. (See E-12)
• The Plasmacluster Ion Generator releases a
small trace of ozone which may produce odor.
This is not detrimental to health.
A discontinuous noise is heard.
A clicking or ticking sound
comes from the unit.
The air fl ow decreases.
• Clicking or ticking sounds may be audible when
the unit is generating ions.
• Dust may block the fi lter, clean the fi lter.
(See E-12)
• Wind quantity sometimes becomes strong
during operation with LOW mode, to confi rm
the condition of ion be not abnormal.
Other indication Failure
Unplug and contact the store you purchased or
Sharp Service Center.