Filter
Top Products
ENGLISH
FRANÇAIS
ESPAÑOL
E-13
HOW TO REPLACE THE PLASMACLUSTER ION GENERATING UNIT
3
Lift the lever to unlock it.
Unit
Pull the lever forward and take out
the Plasmacluster Ion Generating
Unit.
Remove the connector cover.
(4 pcs)
Disconnect the connector of
Plasmacluster Ion Generating Unit.
Push and unlock the
connector, take out the
connector in the direction
of the arrow.
Be sure to replace the Plasmacluster
Ion Generating Units in the proper
locations (with or without sensor) as
indicated in the diagrams.
Plasmacluster Ion Generating Unit
without sensor. : 3PCS
IG-A40U
without
sensor
(3pcs)
with sensor (1pc)
Pull up the lever
Plasmacluster Ion Generating Unit
with sensor. : 1PC
Reset button for Plasmacluster Ion Generating Unit
After replacing the Plasmacluster Ion Generating Unit, insert the plug and
press the UNIT RESET Button for 3 seconds.