Filter
Top Products
6
USING THE VACUUM CLEANER
Various ways to use the cleaning mechanism
When you do not want have automatic operation of the cleaning mechanism
Method 1
Method 2
1
How to set for method 2
When you want to operate the cleaning mechanism manually
Stop
Low
peep, peep
peep
Every time you press
the“Stop”button,
the automatic operation
starts.
In case the product is used just
for a short time, the automatic
operation does not start.
(Blue：Fast-speed blinking)
( Blue：Continuous lighting)
Indication lamp/sound
In automatic operation
Stop
2
Stop
3
Stop
peep, peep, peep
peeep
When you press the Stop bottun, the auto cleaning procesure will start to compress the dust to the bottom of the dust cup.
Stop the automatic operation.Press the Stop button again.
Set the product to “manual cleaning” in case the product is used just for a short time
(1 minute or less).
•
After vacuuming, be sure to operate the cleaning procedure manually before you put the vacuum cleaner
away. (See the following.)
Pull the power plug and insert it into the outlet again. Do not press high/low
button.
(Press and hold for 3 seconds or more)
Press “Low” button.
Every time you press it, the mode is
changed from one to the other.
The setting is complete.
• The setting remains stored even if the power
plug is removed from the outlet.
It is most effective to do this job before emptying the dust cup or taking care of the product.
(Press for 3 seconds or more.)
After finishing vacuum cleaner
operation.
Cleaning mechanism operation.
(For about 15 seconds)
Finish
(Continued)
EC-S2142,S2141.indd 6 12.5.8 2:58:15 PM