Filter
Top Products
6
OPERATING INSTRUCTIONS
First remove the handle screw.
Then slide the base of the handle to
the body of the vacuum cleaner as
shown. (Fig. 1)
1
HOW TO ATTACH THE HANDLE TO VACUUM CLEANER
Fig.1
Fig.2
Line up the hole on the handle with the
hole on the side of the vacuum cleaner
and insert the screw. (Fig. 2)
Be sure the screw is tightened securely.
2
Insert the power cord in the clip
located on handle as shown. (Fig. 3)
1
HOW TO WIND POWER CORD
Wrap excess cord around the cord
storage hooks to prevent dragging and
any interference with cleaning. (Fig. 4)
2
Fig.3
HOW TO RELEASE POWER CORD
Fig.5
Rotate the upper cord storage hook
downward for quick cord release. (Fig. 5)
Fig.4
Handle
Handle screw
Handle screw
Handle
Clip
Upper cord
storage hook
Upper cord storage hook
Lower hook
Slide
2001.12.20, 8:07 AM6