Filter
Top Products
COOL MODE
E-18
2
3
1
4
Install the exhaust hose (See Page14), turn
the drainage nozzle to the CLOSE position,
and check the drainage nozzle is covered
with the stopcock.
Ensure that the stopcock is securely inserted
into the lower drainpipe nozzle and that the
nozzle has not been damaged.
Drainage nozzle
Stopcock
"CLOSE" position
Stopcock
Drainpipe nozzle
1
Press the MODE button to select
COOL mode.
COOL DEHUM FAN VENT
2
Press the POWER button to start op-
eration.
• The red OPERATION lamp on the unit will
light.
3
Press the TEMPERATURE button to
set the desired temperature.
• The temperature can be set within the
range of 64°F to 86°F.
4
Press the FAN button to set the de-
sired fan speed.
AUTO QUIET LOW HIGH
TO TURN OFF
Press the POWER button again.
• The red OPERATION lamp on the unit will
turn off.