GB-7
ENGLISH
In this operation, the air conditioner fan works
at "extra high" speed with a setting temperature
of 15°C in COOL and DRY modes and 32°C in
HEAT mode to rapidly cool or heat the room.
1
During operation, press the TURBO
button.
• The remote control will display “ ” .
• The temperature display will go off.
• The green TURBO lamp (
) on
the unit will light up.
TO CANCEL
Press the TURBO button again.
• The green TURBO lamp ( ) on the unit will
turn off.
NOTE:
• You can not set the temperature or fan speed
during the TURBO operation.
• To turn off the TURBO lamp, press the DISPLAY
button.
• After the unit has run for 30 minutes in TURBO
operation, the fan setting will become the "HIGH"
speed, and temperature setting will become 18°C
in COOL and DRY modes.
TURBO OPERATION
1
In cooling or dry operation, vertical adjustment
louver is set obliquely upward to deliver cool air
to the ceiling in order to avoid direct airfl ow.
In heating operation, vertical adjustment louver
is set downward to deliver the warm air down to
the fl oor.
1
During operation, press the COANDA
AIRFLOW button.
• The remote control will display “ ”.
TO CANCEL
Press the COANDA AIRFLOW button again.
NOTE:
If you want the COANDA AIRFLOW setting in the
TURBO mode, press the COANDA AIRFLOW
button during the TURBO operation.
COANDA AIRFLOW
1