Sharp AF-S50EX Air Conditioner User Manual


 
15
HOW TO OPERATE
OFF TIMER OPERATION
This unit has a built-in timer that can be programmed to shut the unit off up to 12 hours in advance.
You can set the timer to stop in increments of 30 minutes (0.5 hours) up to 9.5 hours in advance
of the stop time, or in 1 hour increments from 10 to 12 hours in advance of the stop time.
The unit will stop automatically according to your setting.
1
Touch the TIMER ON/OFF pad to set the
delayed stop time.
The time setting will change as you touch the
pad. The display will change as follows;
The timer will be set, 5 seconds after the
TIMER ON/OFF pad is touched for the last
time.
TIMER indicator will light.
The time display will count down the remain-
ing time.
The unit will stop when the set time expires.
All indicators and displays will go out.
(If you wish to stop the operation
10 hours later, set the delay time
as shown above.)
NOTES FOR ON/OFF TIMER SETTING AND OPERATION:
After setting the TIMER, change the temperature and fan speed settings as shown on pages 11
and 12. When the temperature is set in the timer mode, the temperature will show in the display
for 5 seconds and then return to the time display.
The last setting used will be memorized and will appear on the display the next time you operate
the unit with the TIMER function.
If a power failure occurs while the ON or OFF TIMER is set, the TIMER memory will be cancelled
and will not resume even after power is reinstated. The unit will not automatically start.
OFF TIMER OPERATION can also be set with the REMOTE CONTROL.
TO CANCEL THE TIMER SETTING
Touch the TIMER ON/OFF pad again after the
timer is set or, press the TIMER ON/OFF pad until
CL(cancel) appears on the display.
When the unit is operating