Filter
Top Products
12
HOW TO OPERATE
---Lower temp.
Touch the TEMPERATURE setting
pad to adjust the temperature set-
ting.
• Temperature can be set within the range
of 64°F to 86°F.
• Display will change as you touch
the pad.
NOTES:
• In fan only (HIGH FAN, MED FAN, LOW FAN) operation, the temperature display will go off and the
temperature setting cannot be changed.
• In cases of power outages or when the unit is disconnected; when the power is restored or the unit is
plugged in, the unit and display will return to the preset conditions of 74°F and HIGH COOL. The unit will
not automatically turn back on. The user must touch POWER ON/OFF to resume operation.
During cooling operation
TO CHANGE TEMPERATURE SETTING
---Raise temp.
TO CHANGE AIR FLOW DIRECTION
Horizontal louvers
Adjust UP/DOWN air flow
The horizontal louvers are used to adjust the UP/DOWN direction of air flow, and the vertical louvers are used
to adjust the LEFT/RIGHT direction of air flow for uniform and efficient cooling of the room.
Vertical louvers
Adjust LEFT/RIGHT air flow
Vertical louver
levers
If air in your room is stale, set the EXHAUST
lever to the OPEN position. This will exhaust
stale air to the outside. The EXHAUST lever
should normally be kept in the CLOSED position
during cooling for maximum efficiency.
EXHAUST
CLOSED OPEN
EXHAUST Lever